More detailed information on the IE Driver.
IE Driver Server
This documentation previously located on the wiki
InternetExplorerDriver is a standalone server which implements WebDriver’s wire protocol.
This driver has been tested with IE 11, and on Windows 10. It might work with older versions
of IE and Windows, but this is not supported.
The driver supports running 32-bit and 64-bit versions of the browser. The choice of how to
determine which “bit-ness” to use in launching the browser depends on which version of the
IEDriverServer.exe is launched. If the 32-bit version of
IEDriverServer.exe is launched,
the 32-bit version of IE will be launched. Similarly, if the 64-bit version of
IEDriverServer.exe is launched, the 64-bit version of IE will be launched.
You do not need to run an installer before using the
InternetExplorerDriver, though some
configuration is required. The standalone server executable must be downloaded from
the Downloads page and placed in your
- Obviously the InternetExplorerDriver will only work on Windows!
- Comparatively slow (though still pretty snappy :)
As a standalone executable, the behavior of the IE driver can be modified through various
command-line arguments. To set the value of these command-line arguments, you should
consult the documentation for the language binding you are using. The command line
switches supported are described in the table below. All -
<switch> are supported.
|–port=||Specifies the port on which the HTTP server of the IE driver will listen for commands from language bindings. Defaults to 5555.|
|–host=||Specifies the IP address of the host adapter on which the HTTP server of the IE driver will listen for commands from language bindings. Defaults to 127.0.0.1.|
|–log-level=||Specifies the level at which logging messages are output. Valid values are FATAL, ERROR, WARN, INFO, DEBUG, and TRACE. Defaults to FATAL.|
|–log-file=||Specifies the full path and file name of the log file. Defaults to stdout.|
|–extract-path=||Specifies the full path to the directory used to extract supporting files used by the server. Defaults to the TEMP directory if not specified.|
|–silent||Suppresses diagnostic output when the server is started.|
Important System Properties
The following system properties (read using
System.getProperty() and set using
System.setProperty() in Java code or the “
-DpropertyName=value” command line flag)
are used by the
|Property||What it means|
|The location of the IE driver binary.|
|Specifies the IP address of the host adapter on which the IE driver will listen.|
|Specifies the level at which logging messages are output. Valid values are FATAL, ERROR, WARN, INFO, DEBUG, and TRACE. Defaults to FATAL.|
|Specifies the full path and file name of the log file.|
|Suppresses diagnostic output when the IE driver is started.|
|Specifies the full path to the directory used to extract supporting files used by the server. Defaults to the TEMP directory if not specified.|
IEDriverServerexecutable must be downloaded and placed in your PATH.
- On IE 7 or higher on Windows Vista, Windows 7, or Windows 10, you must set the Protected Mode settings for each zone to be the same value. The value can be on or off, as long as it is the same for every zone. To set the Protected Mode settings, choose “Internet Options…” from the Tools menu, and click on the Security tab. For each zone, there will be a check box at the bottom of the tab labeled “Enable Protected Mode”.
- Additionally, “Enhanced Protected Mode” must be disabled for IE 10 and higher. This option is found in the Advanced tab of the Internet Options dialog.
- The browser zoom level must be set to 100% so that the native mouse events can be set to the correct coordinates.
- For Windows 10, you also need to set “Change the size of text, apps, and other items” to 100% in display settings.
- For IE 11 only, you will need to set a registry entry on the target computer so that the driver can maintain a connection to the instance of Internet Explorer it creates. For 32-bit Windows installations, the key you must examine in the registry editor is
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_BFCACHE. For 64-bit Windows installations, the key is
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_BFCACHE. Please note that the
FEATURE_BFCACHEsubkey may or may not be present, and should be created if it is not present. Important: Inside this key, create a DWORD value named
iexplore.exewith the value of 0.
Native Events and Internet Explorer
InternetExplorerDriver is Windows-only, it attempts to use so-called “native”, or OS-level
events to perform mouse and keyboard operations in the browser. This is in contrast to using
within the browser. However, there are currently some issues with mouse events when the IE
browser window does not have focus, and when attempting to hover over elements.
The challenge is that IE itself appears to not fully respect the Windows messages we send the
IE browser window (
WM\_MOUSEUP) if the window doesn’t have the focus.
Specifically, the element being clicked on will receive a focus window around it, but the click
will not be processed by the element. Arguably, we shouldn’t be sending messages at all; rather,
we should be using the
SendInput() API, but that API explicitly requires the window to have the
focus. We have two conflicting goals with the WebDriver project.
Second, we want to not require focus of the browser window being automated. This means that just forcing the browser window to the foreground is suboptimal.
An additional consideration is the possibility of multiple IE instances running under multiple WebDriver instances, which means any such “bring the window to the foreground” solution will have to be wrapped in some sort of synchronizing construct (mutex?) within the IE driver’s C++ code. Even so, this code will still be subject to race conditions, if, for example, the user brings another window to the foreground between the driver bringing IE to the foreground and executing the native event.
The discussion around the requirements of the driver and how to prioritize these two conflicting goals is ongoing. The current prevailing wisdom is to prioritize the former over the latter, and document that your machine will be unavailable for other tasks when using the IE driver. However, that decision is far from finalized, and the code to implement it is likely to be rather complicated.
Hovering Over Elements
When you attempt to hover over elements, and your physical mouse cursor is within the boundaries of the IE browser window, the hover will not work. More specifically, the hover will appear to work for a fraction of a second, and then the element will revert back to its previous state. The prevailing theory why this occurs is that IE is doing hit-testing of some sort during its event loop, which causes it to respond to the physical mouse position when the physical cursor is within the window bounds. The WebDriver development team has been unable to discover a workaround for this behavior of IE.
<option> Elements or Submitting Forms and
There are two places where the IE driver does not interact with elements using native events.
This is in clicking
<option> elements within a
<select> element. Under normal circumstances,
the IE driver calculates where to click based on the position and size of the element, typically
getBoundingClientRect() method. However, for
getBoundingClientRect() returns a rectangle with zero position and zero size. The IE driver
handles this one scenario by using the
click() Automation Atom, which essentially sets
.selected property of the element and simulates the
However, this means that if the
onChange event of the
code that calls
prompt(), calling WebElement’s
click() method will
hang until the modal dialog is manually dismissed. There is no known workaround for this behavior
using only WebDriver code.
Similarly, there are some scenarios when submitting an HTML form via WebElement’s
This restriction is filed as issue 3508 (on Google Code).
Multiple instances of
With the creation of the
IEDriverServer.exe, it should be possible to create and use multiple
simultaneous instances of the
InternetExplorerDriver. However, this functionality is largely
untested, and there may be issues with cookies, window focus, and the like. If you attempt to
use multiple instances of the IE driver, and run into such issues, consider using the
RemoteWebDriver and virtual machines.
There are 2 solutions for problem with cookies (and another session items) shared between multiple instances of InternetExplorer.
The first is to start your InternetExplorer in private mode. After that InternetExplorer will be
started with clean session data and will not save changed session data at quiting. To do so you
need to pass 2 specific capabilities to driver:
-private value. Be note that it will work only
for InternetExplorer 8 and newer, and Windows Registry
HKLM_CURRENT_USER\\Software\\Microsoft\\Internet Explorer\\Main path should contain key
The second is to clean session during InternetExplorer starting. For this you need to pass
ie.ensureCleanSession capability with
true value to driver. This clears the cache
for all running instances of InternetExplorer, including those started manually.
The HTTP server started by the
IEDriverServer.exe sets an access control list to only accept
connections from the local machine, and disallows incoming connections from remote machines.
At present, this cannot be changed without modifying the source code to the
To run the Internet Explorer driver on a remote machine, use the Java standalone remote server
in connection with your language binding’s equivalent of
IEDriverServer.exe Under a Windows Service
Attempting to use IEDriverServer.exe as part of a Windows Service application is expressly
unsupported. Service processes, and processes spawned by them, have much different requirements
than those executing in a regular user context.
IEDriverServer.exe is explicitly untested in
that environment, and includes Windows API calls that are documented to be prohibited to be used
in service processes. While it may be possible to get the IE driver to work while running under
a service process, users encountering problems in that environment will need to seek out their