This is the multi-page printable view of this section. Click here to print.

Return to the regular view of this page.

Legacy Selenium IDE

Selenium IDE was the original Firefox extension for Record and Playback.


The Selenium-IDE (Integrated Development Environment) is the tool you use to develop your Selenium test cases. It’s an easy-to-use Firefox plug-in and is generally the most efficient way to develop test cases. It also contains a context menu that allows you to first select a UI element from the browser’s currently displayed page and then select from a list of Selenium commands with parameters pre-defined according to the context of the selected UI element. This is not only a time-saver, but also an excellent way of learning Selenium script syntax.

This chapter is all about the Selenium IDE and how to use it effectively.

Installing the IDE

Using Firefox, first, download the IDE from the SeleniumHQ downloads page

Firefox will protect you from installing addons from unfamiliar locations, so you will need to click ‘Allow’ to proceed with the installation, as shown in the following screenshot.

Selenium IDE Installation 1

When downloading from Firefox, you’ll be presented with the following window.

Selenium IDE Installation 2

Select Install Now. The Firefox Add-ons window pops up, first showing a progress bar, and when the download is complete, displays the following.

Selenium IDE Installation 3

Restart Firefox. After Firefox reboots you will find the Selenium-IDE listed under the Firefox Tools menu.

Selenium IDE Installation 4

Opening the IDE

To run the Selenium-IDE, simply select it from the Firefox Tools menu. It opens as follows with an empty script-editing window and a menu for loading, or creating new test cases.

Selenium IDE Open

IDE Features

The File menu has options for Test Case and Test Suite (suite of Test Cases). Using these you can add a new Test Case, open a Test Case, save a Test Case, export Test Case in a language of your choice. You can also open the recent Test Case. All these options are also available for Test Suite.

The Edit menu allows copy, paste, delete, undo, and select all operations for editing the commands in your test case. The Options menu allows the changing of settings. You can set the timeout value for certain commands, add user-defined user extensions to the base set of Selenium commands, and specify the format (language) used when saving your test cases. The Help menu is the standard Firefox Help menu; only one item on this menu–UI-Element Documentation–pertains to Selenium-IDE.


The toolbar contains buttons for controlling the execution of your test cases, including a step feature for debugging your test cases. The right-most button, the one with the red-dot, is the record button.

Selenium IDE Features Selenium IDE Features

Speed Control: controls how fast your test case runs.

Selenium IDE Features

Run All: Runs the entire test suite when a test suite with multiple test cases is loaded.

Selenium IDE Features

Run: Runs the currently selected test. When only a single test is loaded this button and the Run All button have the same effect.

Selenium IDE Features Selenium IDE Features

Pause/Resume: Allows stopping and re-starting of a running test case.

Selenium IDE Features

Step: Allows you to “step” through a test case by running it one command at a time. Use for debugging test cases.

Selenium IDE Features

TestRunner Mode: Allows you to run the test case in a browser loaded with the Selenium-Core TestRunner. The TestRunner is not commonly used now and is likely to be deprecated. This button is for evaluating test cases for backwards compatibility with the TestRunner. Most users will probably not need this button.

Selenium IDE Features

Apply Rollup Rules: This advanced feature allows repetitive sequences of Selenium commands to be grouped into a single action. Detailed documentation on rollup rules can be found in the UI-Element Documentation on the Help menu.

Selenium IDE Features

Test Case Pane

Your script is displayed in the test case pane. It has two tabs, one for displaying the command and their parameters in a readable “table” format.

Selenium IDE Image Pane

The other tab - Source displays the test case in the native format in which the file will be stored. By default, this is HTML although it can be changed to a programming language such as Java or C#, or a scripting language like Python. See the Options menu for details. The Source view also allows one to edit the test case in its raw form, including copy, cut and paste operations.

The Command, Target, and Value entry fields display the currently selected command along with its parameters. These are entry fields where you can modify the currently selected command. The first parameter specified for a command in the Reference tab of the bottom pane always goes in the Target field. If a second parameter is specified by the Reference tab, it always goes in the Value field.

Selenium IDE Entry Fields

If you start typing in the Command field, a drop-down list will be populated based on the first characters you type; you can then select your desired command from the drop-down.

Log/Reference/UI-Element/Rollup Pane

The bottom pane is used for four different functions–Log, Reference, UI-Element, and Rollup–depending on which tab is selected.


When you run your test case, error messages and information messages showing the progress are displayed in this pane automatically, even if you do not first select the Log tab. These messages are often useful for test case debugging. Notice the Clear button for clearing the Log. Also notice the Info button is a drop-down allowing selection of different levels of information to log.

Selenium IDE Bottom Box


The Reference tab is the default selection whenever you are entering or modifying Selenese commands and parameters in Table mode. In Table mode, the Reference pane will display documentation on the current command. When entering or modifying commands, whether from Table or Source mode, it is critically important to ensure that the parameters specified in the Target and Value fields match those specified in the parameter list in the Reference pane. The number of parameters provided must match the number specified, the order of parameters provided must match the order specified, and the type of parameters provided must match the type specified. If there is a mismatch in any of these three areas, the command will not run correctly.

Selenium IDE Bottom Box

While the Reference tab is invaluable as a quick reference, it is still often necessary to consult the Selenium Reference document.

UI-Element and Rollup

Detailed information on these two panes (which cover advanced features) can be found in the UI-Element Documentation on the Help menu of Selenium-IDE.

Building Test Cases

There are three primary methods for developing test cases. Frequently, a test developer will require all three techniques.


Many first-time users begin by recording a test case from their interactions with a website. When Selenium-IDE is first opened, the record button is ON by default. If you do not want Selenium-IDE to begin recording automatically you can turn this off by going under Options > Options… and deselecting “Start recording immediately on open.”

During recording, Selenium-IDE will automatically insert commands into your test case based on your actions. Typically, this will include:

  • clicking a link - click or clickAndWait commands
  • entering values - type command
  • selecting options from a drop-down listbox - select command
  • clicking checkboxes or radio buttons - click command

Here are some “gotchas” to be aware of:

  • The type command may require clicking on some other area of the web page for it to record.
  • Following a link usually records a click command. You will often need to change this to clickAndWait to ensure your test case pauses until the new page is completely loaded. Otherwise, your test case will continue running commands before the page has loaded all its UI elements. This will cause unexpected test case failures.

Adding Verifications and Asserts With the Context Menu

Your test cases will also need to check the properties of a web-page. This requires assert and verify commands. We won’t describe the specifics of these commands here; that is in the chapter on Selenium Commands – “Selenese”. Here we’ll simply describe how to add them to your test case.

With Selenium-IDE recording, go to the browser displaying your test application and right click anywhere on the page. You will see a context menu showing verify and/or assert commands.

The first time you use Selenium, there may only be one Selenium command listed. As you use the IDE however, you will find additional commands will quickly be added to this menu. Selenium-IDE will attempt to predict what command, along with the parameters, you will need for a selected UI element on the current web-page.

Let’s see how this works. Open a web-page of your choosing and select a block of text on the page. A paragraph or a heading will work fine. Now, right-click the selected text. The context menu should give you a verifyTextPresent command and the suggested parameter should be the text itself.

Also, notice the Show All Available Commands menu option. This shows many, many more commands, again, along with suggested parameters, for testing your currently selected UI element.

Try a few more UI elements. Try right-clicking an image, or a user control like a button or a checkbox. You may need to use Show All Available Commands to see options other than verifyTextPresent. Once you select these other options, the more commonly used ones will show up on the primary context menu. For example, selecting verifyElementPresent for an image should later cause that command to be available on the primary context menu the next time you select an image and right-click.

Again, these commands will be explained in detail in the chapter on Selenium commands. For now though, feel free to use the IDE to record and select commands into a test case and then run it. You can learn a lot about the Selenium commands simply by experimenting with the IDE.


Insert Command

Table View

Select the point in your test case where you want to insert the command. To do this, in the Test Case Pane, left-click on the line where you want to insert a new command. Right-click and select Insert Command; the IDE will add a blank line just ahead of the line you selected. Now use the command editing text fields to enter your new command and its parameters.

Source View

Select the point in your test case where you want to insert the command. To do this, in the Test Case Pane, left-click between the commands where you want to insert a new command, and enter the HTML tags needed to create a 3-column row containing the Command, first parameter (if one is required by the Command), and second parameter (again, if one is required to locate an element) and third parameter(again, if one is required to have a value). Example:

    <td>target (locator)</td>

Insert Comment

Comments may be added to make your test case more readable. These comments are ignored when the test case is run.

Comments may also be used to add vertical white space (one or more blank lines) in your tests; just create empty comments. An empty command will cause an error during execution; an empty comment won’t.

Table View

Select the line in your test case where you want to insert the comment. Right-click and select Insert Comment. Now use the Command field to enter the comment. Your comment will appear in purple text.

Source View

Select the point in your test case where you want to insert the comment. Add an HTML-style comment, i.e., <!-- your comment here -->.

Edit a Command or Comment

Table View

Simply select the line to be changed and edit it using the Command, Target, and Value fields.

Source View

Since Source view provides the equivalent of a WYSIWYG (What You See is What You Get) editor, simply modify which line you wish–command, parameter, or comment.

Opening and Saving a Test Case

Like most programs, there are Save and Open commands under the File menu. However, Selenium distinguishes between test cases and test suites. To save your Selenium-IDE tests for later use you can either save the individual test cases, or save the test suite. If the test cases of your test suite have not been saved, you’ll be prompted to save them before saving the test suite.

When you open an existing test case or suite, Selenium-IDE displays its Selenium commands in the Test Case Pane.

Running Test Cases

The IDE allows many options for running your test case. You can run a test case all at once, stop and start it, run it one line at a time, run a single command you are currently developing, and you can do a batch run of an entire test suite. Execution of test cases is very flexible in the IDE.

Run a Test Case

Click the Run button to run the currently displayed test case.

Run a Test Suite

Click the Run All button to run all the test cases in the currently loaded test suite.

Stop and Start

The Pause button can be used to stop the test case while it is running. The icon of this button then changes to indicate the Resume button. To continue click Resume.

Stop in the Middle

You can set a breakpoint in the test case to cause it to stop on a particular command. This is useful for debugging your test case. To set a breakpoint, select a command, right-click, and from the context menu select Toggle Breakpoint.

Start from the Middle

You can tell the IDE to begin running from a specific command in the middle of the test case. This also is used for debugging. To set a startpoint, select a command, right-click, and from the context menu select Set/Clear Start Point.

Run Any Single Command

Double-click any single command to run it by itself. This is useful when writing a single command. It lets you immediately test a command you are constructing, when you are not sure if it is correct. You can double-click it to see if it runs correctly. This is also available from the context menu.

Using Base URL to Run Test Cases in Different Domains

The Base URL field at the top of the Selenium-IDE window is very useful for allowing test cases to be run across different domains. Suppose that a site named had an in-house beta site named Any test cases for these sites that begin with an open statement should specify a relative URL as the argument to open rather than an absolute URL (one starting with a protocol such as http: or https:). Selenium-IDE will then create an absolute URL by appending the open command’s argument onto the end of the value of Base URL. For example, the test case below would be run against

Selenium IDE Prod URL

This same test case with a modified Base URL setting would be run against

Selenium IDE Beta URL

Selenium Commands – “Selenese”

Selenium commands, often called selenese, are the set of commands that run your tests. A sequence of these commands is a test script. Here we explain those commands in detail, and we present the many choices you have in testing your web application when using Selenium.

Selenium provides a rich set of commands for fully testing your web-app in virtually any way you can imagine. The command set is often called selenese. These commands essentially create a testing language.

In selenese, one can test the existence of UI elements based on their HTML tags, test for specific content, test for broken links, input fields, selection list options, submitting forms, and table data among other things. In addition Selenium commands support testing of window size, mouse position, alerts, Ajax functionality, pop up windows, event handling, and many other web-application features. The Command Reference lists all the available commands.

A command tells Selenium what to do. Selenium commands come in three “flavors”: Actions, Accessors, and Assertions.

  • Actions are commands that generally manipulate the state of the application. They do things like “click this link” and “select that option”. If an Action fails, or has an error, the execution of the current test is stopped.

    Many Actions can be called with the “AndWait” suffix, e.g. “clickAndWait”. This suffix tells Selenium that the action will cause the browser to make a call to the server, and that Selenium should wait for a new page to load.

  • Accessors examine the state of the application and store the results in variables, e.g. “storeTitle”. They are also used to automatically generate Assertions.

  • Assertions are like Accessors, but they verify that the state of the application conforms to what is expected. Examples include “make sure the page title is X” and “verify that this checkbox is checked”.

All Selenium Assertions can be used in 3 modes: “assert”, “verify”, and ” waitFor”. For example, you can “assertText”, “verifyText” and “waitForText”. When an “assert” fails, the test is aborted. When a “verify” fails, the test will continue execution, logging the failure. This allows a single “assert” to ensure that the application is on the correct page, followed by a bunch of “verify” assertions to test form field values, labels, etc.

“waitFor” commands wait for some condition to become true (which can be useful for testing Ajax applications). They will succeed immediately if the condition is already true. However, they will fail and halt the test if the condition does not become true within the current timeout setting (see the setTimeout action below).

Script Syntax

Selenium commands are simple, they consist of the command and two parameters. For example:


The parameters are not always required; it depends on the command. In some cases both are required, in others one parameter is required, and in still others the command may take no parameters at all. Here are a couple more examples:

verifyTextPresentWelcome to My Home Page
typeid=phone(555) 666-7066

The command reference describes the parameter requirements for each command.

Parameters vary, however they are typically:

  • a locator for identifying a UI element within a page.
  • a text pattern for verifying or asserting expected page content
  • a text pattern or a Selenium variable for entering text in an input field or for selecting an option from an option list.

Locators, text patterns, Selenium variables, and the commands themselves are described in considerable detail in the section on Selenium Commands.

Selenium scripts that will be run from Selenium-IDE will be stored in an HTML text file format. This consists of an HTML table with three columns. The first column identifies the Selenium command, the second is a target, and the final column contains a value. The second and third columns may not require values depending on the chosen Selenium command, but they should be present. Each table row represents a new Selenium command. Here is an example of a test that opens a page, asserts the page title and then verifies some content on the page:


Rendered as a table in a browser this would look like the following:


The Selenese HTML syntax can be used to write and run tests without requiring knowledge of a programming language. With a basic knowledge of selenese and Selenium-IDE you can quickly produce and run testcases.

Test Suites

A test suite is a collection of tests. Often one will run all the tests in a test suite as one continuous batch-job.

When using Selenium-IDE, test suites also can be defined using a simple HTML file. The syntax again is simple. An HTML table defines a list of tests where each row defines the filesystem path to each test. An example tells it all.

<title>Test Suite Function Tests - Priority 1</title>
  <tr><td><b>Suite Of Tests</b></td></tr>
  <tr><td><a href="./Login.html">Login</a></td></tr>
  <tr><td><a href="./SearchValues.html">Test Searching for Values</a></td></tr>
  <tr><td><a href="./SaveValues.html">Test Save</a></td></tr>

A file similar to this would allow running the tests all at once, one after another, from the Selenium-IDE.

Test suites can also be maintained when using Selenium-RC. This is done via programming and can be done a number of ways. Commonly Junit is used to maintain a test suite if one is using Selenium-RC with Java. Additionally, if C# is the chosen language, Nunit could be employed. If using an interpreted language like Python with Selenium-RC then some simple programming would be involved in setting up a test suite. Since the whole reason for using Selenium-RC is to make use of programming logic for your testing this usually isn’t a problem.

Commonly Used Selenium Commands

To conclude our introduction of Selenium, we’ll show you a few typical Selenium commands. These are probably the most commonly used commands for building tests.


opens a page using a URL.


performs a click operation, and optionally waits for a new page to load.


verifies an expected page title.


verifies expected text is somewhere on the page.


verifies an expected UI element, as defined by its HTML tag, is present on the page.


verifies expected text and its corresponding HTML tag are present on the page.


verifies a table’s expected contents.


pauses execution until an expected new page loads. Called automatically when clickAndWait is used.


pauses execution until an expected UI element, as defined by its HTML tag, is present on the page.

Verifying Page Elements

Verifying UI elements on a web page is probably the most common feature of your automated tests. Selenese allows multiple ways of checking for UI elements. It is important that you understand these different methods because these methods define what you are actually testing.

For example, will you test that…

  1. an element is present somewhere on the page?
  2. specific text is somewhere on the page?
  3. specific text is at a specific location on the page?

For example, if you are testing a text heading, the text and its position at the top of the page are probably relevant for your test. If, however, you are testing for the existence of an image on the home page, and the web designers frequently change the specific image file along with its position on the page, then you only want to test that an image (as opposed to the specific image file) exists somewhere on the page.

Assertion or Verification?

Choosing between “assert” and “verify” comes down to convenience and management of failures. There’s very little point checking that the first paragraph on the page is the correct one if your test has already failed when checking that the browser is displaying the expected page. If you’re not on the correct page, you’ll probably want to abort your test case so that you can investigate the cause and fix the issue(s) promptly. On the other hand, you may want to check many attributes of a page without aborting the test case on the first failure as this will allow you to review all failures on the page and take the appropriate action. Effectively an “assert” will fail the test and abort the current test case, whereas a “verify” will fail the test and continue to run the test case.

The best use of this feature is to logically group your test commands, and start each group with an “assert” followed by one or more “verify” test commands. An example follows:

assertTable1.2.1Selenium IDE
verifyTable1.2.2June 3, 2008
verifyTable1.2.31.0 beta 2

The above example first opens a page and then “asserts” that the correct page is loaded by comparing the title with the expected value. Only if this passes will the following command run and “verify” that the text is present in the expected location. The test case then “asserts” the first column in the second row of the first table contains the expected value, and only if this passed will the remaining cells in that row be “verified”.


The command verifyTextPresent is used to verify specific text exists somewhere on the page. It takes a single argument–the text pattern to be verified. For example:

verifyTextPresentMarketing Analysis

This would cause Selenium to search for, and verify, that the text string “Marketing Analysis” appears somewhere on the page currently being tested. Use verifyTextPresent when you are interested in only the text itself being present on the page. Do not use this when you also need to test where the text occurs on the page.


Use this command when you must test for the presence of a specific UI element, rather than its content. This verification does not check the text, only the HTML tag. One common use is to check for the presence of an image.


This command verifies that an image, specified by the existence of an HTML tag, is present on the page, and that it follows a

tag and a

tag. The first (and only) parameter is a locator for telling the Selenese command how to find the element. Locators are explained in the next section.

verifyElementPresent can be used to check the existence of any HTML tag within the page. You can check the existence of links, paragraphs, divisions

, etc. Here are a few more examples.

verifyElementPresentlink=Go to Marketing Research

These examples illustrate the variety of ways a UI element may be tested. Again, locators are explained in the next section.


Use verifyText when both the text and its UI element must be tested. verifyText must use a locator. If you choose an XPath or DOM locator, you can verify that specific text appears at a specific location on the page relative to other UI components on the page.

verifyText//table/tr/td/div/pThis is my text and it occurs right after the div inside the table.

Locating Elements

For many Selenium commands, a target is required. This target identifies an element in the content of the web application, and consists of the location strategy followed by the location in the format locatorType=location. The locator type can be omitted in many cases. The various locator types are explained below with examples for each.

Locating by Identifier

This is probably the most common method of locating elements and is the catch-all default when no recognized locator type is used. With this strategy, the first element with the id attribute value matching the location will be used. If no element has a matching id attribute, then the first element with a name attribute matching the location will be used.

For instance, your page source could have id and name attributes as follows:

    <form id="loginForm">
     <input name="username" type="text" />
     <input name="password" type="password" />
     <input name="continue" type="submit" value="Login" />

The following locator strategies would return the elements from the HTML snippet above indicated by line number:

  • identifier=loginForm (3)
  • identifier=password (5)
  • identifier=continue (6)
  • continue (6)

Since the identifier type of locator is the default, the identifier= in the first three examples above is not necessary.

Locating by Id

This type of locator is more limited than the identifier locator type, but also more explicit. Use this when you know an element’s id attribute.

     <form id="loginForm">
      <input name="username" type="text" />
      <input name="password" type="password" />
      <input name="continue" type="submit" value="Login" />
      <input name="continue" type="button" value="Clear" />
  • id=loginForm (3)

Locating by Name

The name locator type will locate the first element with a matching name attribute. If multiple elements have the same value for a name attribute, then you can use filters to further refine your location strategy. The default filter type is value (matching the value attribute).

     <form id="loginForm">
      <input name="username" type="text" />
      <input name="password" type="password" />
      <input name="continue" type="submit" value="Login" />
      <input name="continue" type="button" value="Clear" />
  • name=username (4)
  • name=continue value=Clear (7)
  • name=continue Clear (7)
  • name=continue type=button (7)

Note: Unlike some types of XPath and DOM locators, the three types of locators above allow Selenium to test a UI element independent of its location on the page. So if the page structure and organization is altered, the test will still pass. You may or may not want to also test whether the page structure changes. In the case where web designers frequently alter the page, but its functionality must be regression tested, testing via id and name attributes, or really via any HTML property, becomes very important.

Locating by XPath

XPath is the language used for locating nodes in an XML document. As HTML can be an implementation of XML (XHTML), Selenium users can leverage this powerful language to target elements in their web applications. XPath extends beyond (as well as supporting) the simple methods of locating by id or name attributes, and opens up all sorts of new possibilities such as locating the third checkbox on the page.

One of the main reasons for using XPath is when you don’t have a suitable id or name attribute for the element you wish to locate. You can use XPath to either locate the element in absolute terms (not advised), or relative to an element that does have an id or name attribute. XPath locators can also be used to specify elements via attributes other than id and name.

Absolute XPaths contain the location of all elements from the root (html) and as a result are likely to fail with only the slightest adjustment to the application. By finding a nearby element with an id or name attribute (ideally a parent element) you can locate your target element based on the relationship. This is much less likely to change and can make your tests more robust.

Since only xpath locators start with “//”, it is not necessary to include the xpath= label when specifying an XPath locator.

     <form id="loginForm">
      <input name="username" type="text" />
      <input name="password" type="password" />
      <input name="continue" type="submit" value="Login" />
      <input name="continue" type="button" value="Clear" />
  • xpath=/html/body/form[1] (3) - Absolute path (would break if the HTML was changed only slightly)
  • //form[1] (3) - First form element in the HTML
  • xpath=//form[@id='loginForm'] (3) - The form element with attribute named ‘id’ and the value ’loginForm’
  • xpath=//form[input/@name='username'] (3) - First form element with an input child element with attribute named ’name’ and the value ‘username’
  • //input[@name='username'] (4) - First input element with attribute named ’name’ and the value ‘username’
  • //form[@id='loginForm']/input[1] (4) - First input child element of the form element with attribute named ‘id’ and the value ’loginForm’
  • //input[@name='continue'][@type='button'] (7) - Input with attribute named ’name’ and the value ‘continue’ and attribute named ’type’ and the value ‘button’
  • //form[@id='loginForm']/input[4] (7) - Fourth input child element of the form element with attribute named ‘id’ and value ’loginForm’

These examples cover some basics, but in order to learn more, the following references are recommended:

There are also a couple of very useful Firefox Add-ons that can assist in discovering the XPath of an element:

This is a simple method of locating a hyperlink in your web page by using the text of the link. If two links with the same text are present, then the first match will be used.

    <p>Are you sure you want to do this?</p>
    <a href="continue.html">Continue</a> 
    <a href="cancel.html">Cancel</a>
  • link=Continue (4)
  • link=Cancel (5)

Locating by DOM

The Document Object Model represents an HTML document and can be accessed using JavaScript. This location strategy takes JavaScript that evaluates to an element on the page, which can be simply the element’s location using the hierarchical dotted notation.

Since only dom locators start with “document”, it is not necessary to include the dom= label when specifying a DOM locator.

     <form id="loginForm">
      <input name="username" type="text" />
      <input name="password" type="password" />
      <input name="continue" type="submit" value="Login" />
      <input name="continue" type="button" value="Clear" />
  • dom=document.getElementById('loginForm') (3)
  • dom=document.forms['loginForm'] (3)
  • dom=document.forms[0] (3)
  • document.forms[0].username (4)
  • document.forms[0].elements['username'] (4)
  • document.forms[0].elements[0] (4)
  • document.forms[0].elements[3] (7)

You can use Selenium itself as well as other sites and extensions to explore the DOM of your web application. A good reference exists on W3Schools.

Locating by CSS

CSS (Cascading Style Sheets) is a language for describing the rendering of HTML and XML documents. CSS uses Selectors for binding style properties to elements in the document. These Selectors can be used by Selenium as another locating strategy.

     <form id="loginForm">
      <input class="required" name="username" type="text" />
      <input class="required passfield" name="password" type="password" />
      <input name="continue" type="submit" value="Login" />
      <input name="continue" type="button" value="Clear" />
  • css=form#loginForm (3)
  • css=input[name="username"] (4)
  • css=input.required[type="text"] (4)
  • css=input.passfield (5)
  • css=#loginForm input[type="button"] (7)
  • css=#loginForm input:nth-child(2) (5)

For more information about CSS Selectors, the best place to go is the W3C publication. You’ll find additional references there.

Implicit Locators

You can choose to omit the locator type in the following situations:

  • Locators without an explicitly defined locator strategy will default to using the identifier locator strategy. See Locating by Identifier_.

  • Locators starting with “//” will use the XPath locator strategy. See Locating by XPath_.

  • Locators starting with “document” will use the DOM locator strategy. See Locating by DOM_

Matching Text Patterns

Like locators, patterns are a type of parameter frequently required by Selenese commands. Examples of commands which require patterns are verifyTextPresent, verifyTitle, verifyAlert, assertConfirmation, verifyText, and verifyPrompt. And as has been mentioned above, link locators can utilize a pattern. Patterns allow you to describe, via the use of special characters, what text is expected rather than having to specify that text exactly.

There are three types of patterns: globbing, regular expressions, and exact.

Globbing Patterns

Most people are familiar with globbing as it is utilized in filename expansion at a DOS or Unix/Linux command line such as ls *.c. In this case, globbing is used to display all the files ending with a .c extension that exist in the current directory. Globbing is fairly limited.
Only two special characters are supported in the Selenium implementation:

* which translates to “match anything,” i.e., nothing, a single character, or many characters.

[ ] (character class) which translates to “match any single character found inside the square brackets.” A dash (hyphen) can be used as a shorthand to specify a range of characters (which are contiguous in the ASCII character set). A few examples will make the functionality of a character class clear:

[aeiou] matches any lowercase vowel

[0-9] matches any digit

[a-zA-Z0-9] matches any alphanumeric character

In most other contexts, globbing includes a third special character, the ?. However, Selenium globbing patterns only support the asterisk and character class.

To specify a globbing pattern parameter for a Selenese command, you can prefix the pattern with a glob: label. However, because globbing patterns are the default, you can also omit the label and specify just the pattern itself.

Below is an example of two commands that use globbing patterns. The actual link text on the page being tested was “Film/Television Department”; by using a pattern rather than the exact text, the click command will work even if the link text is changed to “Film & Television Department” or “Film and Television Department”. The glob pattern’s asterisk will match “anything or nothing” between the word “Film” and the word “Television”.

clicklink=glob:Film*Television Department

The actual title of the page reached by clicking on the link was “De Anza Film And Television Department - Menu”. By using a pattern rather than the exact text, the verifyTitle will pass as long as the two words “Film” and “Television” appear (in that order) anywhere in the page’s title. For example, if the page’s owner should shorten the title to just “Film & Television Department,” the test would still pass. Using a pattern for both a link and a simple test that the link worked (such as the verifyTitle above does) can greatly reduce the maintenance for such test cases.

Regular Expression Patterns

Regular expression patterns are the most powerful of the three types of patterns that Selenese supports. Regular expressions are also supported by most high-level programming languages, many text editors, and a host of tools, including the Linux/Unix command-line utilities grep, sed, and awk. In Selenese, regular expression patterns allow a user to perform many tasks that would be very difficult otherwise. For example, suppose your test needed to ensure that a particular table cell contained nothing but a number. regexp: [0-9]+ is a simple pattern that will match a decimal number of any length.

Whereas Selenese globbing patterns support only the * and [ ] (character class) features, Selenese regular expression patterns offer the same wide array of special characters that exist in JavaScript. Below are a subset of those special characters:

.any single character
[ ]character class: any single character that appears inside the brackets
*quantifier: 0 or more of the preceding character (or group)
+quantifier: 1 or more of the preceding character (or group)
?quantifier: 0 or 1 of the preceding character (or group)
{1,5}quantifier: 1 through 5 of the preceding character (or group)
|alternation: the character/group on the left or the character/group on the right
( )grouping: often used with alternation and/or quantifier

Regular expression patterns in Selenese need to be prefixed with either regexp: or regexpi:. The former is case-sensitive; the latter is case-insensitive.

A few examples will help clarify how regular expression patterns can be used with Selenese commands. The first one uses what is probably the most commonly used regular expression pattern–.* (“dot star”). This two-character sequence can be translated as “0 or more occurrences of any character” or more simply, “anything or nothing.” It is the equivalent of the one-character globbing pattern * (a single asterisk).

clicklink=glob:Film*Television Department

The example above is functionally equivalent to the earlier example that used globbing patterns for this same test. The only differences are the prefix (regexp: instead of glob:) and the “anything or nothing” pattern (.* instead of just *).

The more complex example below tests that the Yahoo! Weather page for Anchorage, Alaska contains info on the sunrise time:

verifyTextPresentregexp:Sunrise: *[0-9]{1,2}:[0-9]{2} [ap]m

Let’s examine the regular expression above one part at a time:

Sunrise: *The string Sunrise: followed by 0 or more spaces
[0-9]{1,2}1 or 2 digits (for the hour of the day)
:The character : (no special characters involved)
[0-9]{2}2 digits (for the minutes) followed by a space
[ap]m“a” or “p” followed by “m” (am or pm)

Exact Patterns

The exact type of Selenium pattern is of marginal usefulness. It uses no special characters at all. So, if you needed to look for an actual asterisk character (which is special for both globbing and regular expression patterns), the exact pattern would be one way to do that. For example, if you wanted to select an item labeled “Real *” from a dropdown, the following code might work or it might not. The asterisk in the glob:Real * pattern will match anything or nothing. So, if there was an earlier select option labeled “Real Numbers,” it would be the option selected rather than the “Real *” option.

select//selectglob:Real *

In order to ensure that the “Real *” item would be selected, the exact: prefix could be used to create an exact pattern as shown below:

select//selectexact:Real *

But the same effect could be achieved via escaping the asterisk in a regular expression pattern:

select//selectregexp:Real \*

It’s rather unlikely that most testers will ever need to look for an asterisk or a set of square brackets with characters inside them (the character class for globbing patterns). Thus, globbing patterns and regular expression patterns are sufficient for the vast majority of us.

The “AndWait” Commands

The difference between a command and its AndWait alternative is that the regular command (e.g. click) will do the action and continue with the following command as fast as it can, while the AndWait alternative (e.g. clickAndWait) tells Selenium to wait for the page to load after the action has been done.

The AndWait alternative is always used when the action causes the browser to navigate to another page or reload the present one.

Be aware, if you use an AndWait command for an action that does not trigger a navigation/refresh, your test will fail. This happens because Selenium will reach the AndWait’s timeout without seeing any navigation or refresh being made, causing Selenium to raise a timeout exception.

The waitFor Commands in AJAX applications

In AJAX driven web applications, data is retrieved from server without refreshing the page. Using andWait commands will not work as the page is not actually refreshed. Pausing the test execution for a certain period of time is also not a good approach as web element might appear later or earlier than the stipulated period depending on the system’s responsiveness, load or other uncontrolled factors of the moment, leading to test failures. The best approach would be to wait for the needed element in a dynamic period and then continue the execution as soon as the element is found.

This is done using waitFor commands, as waitForElementPresent or waitForVisible, which wait dynamically, checking for the desired condition every second and continuing to the next command in the script as soon as the condition is met.

Sequence of Evaluation and Flow Control

When a script runs, it simply runs in sequence, one command after another.

Selenese, by itself, does not support condition statements (if-else, etc.) or iteration (for, while, etc.). Many useful tests can be conducted without flow control. However, for a functional test of dynamic content, possibly involving multiple pages, programming logic is often needed.

When flow control is needed, there are three options:

a) Run the script using Selenium-RC and a client library such as Java or PHP to utilize the programming language’s flow control features. b) Run a small JavaScript snippet from within the script using the storeEval command. c) Install the goto_sel_ide.js extension.

Most testers will export the test script into a programming language file that uses the Selenium-RC API (see the Selenium-IDE chapter). However, some organizations prefer to run their scripts from Selenium-IDE whenever possible (for instance, when they have many junior-level people running tests for them, or when programming skills are lacking). If this is your case, consider a JavaScript snippet or the goto_sel_ide.js extension.

Store Commands and Selenium Variables

You can use Selenium variables to store constants at the beginning of a script. Also, when combined with a data-driven test design (discussed in a later section), Selenium variables can be used to store values passed to your test program from the command-line, from another program, or from a file.

The plain store command is the most basic of the many store commands and can be used to simply store a constant value in a Selenium variable. It takes two parameters, the text value to be stored and a Selenium variable. Use the standard variable naming conventions of only alphanumeric characters when choosing a name for your variable.


Later in your script, you’ll want to use the stored value of your variable. To access the value of a variable, enclose the variable in curly brackets ({}) and precede it with a dollar sign like this.


A common use of variables is for storing input for an input field.


Selenium variables can be used in either the first or second parameter and are interpreted by Selenium prior to any other operations performed by the command. A Selenium variable may also be used within a locator expression.

An equivalent store command exists for each verify and assert command. Here are a couple more commonly used store commands.


This corresponds to verifyElementPresent. It simply stores a boolean value–“true” or “false”–depending on whether the UI element is found.


StoreText corresponds to verifyText. It uses a locator to identify specific page text. The text, if found, is stored in the variable. StoreText can be used to extract text from the page being tested.


This command takes a script as its first parameter. Embedding JavaScript within Selenese is covered in the next section. StoreEval allows the test to store the result of running the script in a variable.

JavaScript and Selenese Parameters

JavaScript can be used with two types of Selenese parameters: script and non-script (usually expressions). In most cases, you’ll want to access and/or manipulate a test case variable inside the JavaScript snippet used as a Selenese parameter. All variables created in your test case are stored in a JavaScript associative array. An associative array has string indexes rather than sequential numeric indexes. The associative array containing your test case’s variables is named storedVars. Whenever you wish to access or manipulate a variable within a JavaScript snippet, you must refer to it as storedVars[‘yourVariableName’].

JavaScript Usage with Script Parameters

Several Selenese commands specify a script parameter including assertEval, verifyEval, storeEval, and waitForEval. These parameters require no special syntax. A Selenium-IDE user would simply place a snippet of JavaScript code into the appropriate field, normally the Target field (because a script parameter is normally the first or only parameter).

The example below illustrates how a JavaScript snippet can be used to perform a simple numerical calculation:


This next example illustrates how a JavaScript snippet can include calls to methods, in this case the JavaScript String object’s toUpperCase method and toLowerCase method.

storeEdith Whartonname

JavaScript Usage with Non-Script Parameters

JavaScript can also be used to help generate values for parameters, even when the parameter is not specified to be of type script.
However, in this case, special syntax is required–the entire parameter value must be prefixed by javascript{ with a trailing }, which encloses the JavaScript snippet, as in javascript{*yourCodeHere*}. Below is an example in which the type command’s second parameter value is generated via JavaScript code using this special syntax:

storeleague of nationssearchString

echo - The Selenese Print Command

Selenese has a simple command that allows you to print text to your test’s output. This is useful for providing informational progress notes in your test which display on the console as your test is running. These notes also can be used to provide context within your test result reports, which can be useful for finding where a defect exists on a page in the event your test finds a problem. Finally, echo statements can be used to print the contents of Selenium variables.

echoTesting page footer now.
echoUsername is \${userName}

Alerts, Popups, and Multiple Windows

Suppose that you are testing a page that looks like this.

    <script type="text/javascript">
      function output(resultText){

      function show_confirm(){
        var confirmation=confirm("Chose an option.");
        if (confirmation==true){
      function show_alert(){
        alert("I'm blocking!");
        output("Alert is gone.");
      function show_prompt(){
        var response = prompt("What's the best web QA tool?","Selenium");
      function open_window(windowName){"newWindow.html",windowName);

    <input type="button" id="btnConfirm" onclick="show_confirm()" value="Show confirm box" />
    <input type="button" id="btnAlert" onclick="show_alert()" value="Show alert" />
    <input type="button" id="btnPrompt" onclick="show_prompt()" value="Show prompt" />
    <a href="newWindow.html" id="lnkNewWindow" target="_blank">New Window Link</a>
    <input type="button" id="btnNewNamelessWindow" onclick="open_window()" value="Open Nameless Window" />
    <input type="button" id="btnNewNamedWindow" onclick="open_window('Mike')" value="Open Named Window" />

    <br />
    <span id="output">

The user must respond to alert/confirm boxes, as well as moving focus to newly opened popup windows. Fortunately, Selenium can cover JavaScript pop-ups.

But before we begin covering alerts/confirms/prompts in individual detail, it is helpful to understand the commonality between them. Alerts, confirmation boxes and prompts all have variations of the following

assertFoo(pattern)throws error if pattern doesn’t match the text of the pop-up
assertFooPresentthrows error if pop-up is not available
assertFooNotPresentthrows error if any pop-up is present
storeFoo(variable)stores the text of the pop-up in a variable
storeFooPresent(variable)stores the text of the pop-up in a variable and returns true or false

When running under Selenium, JavaScript pop-ups will not appear. This is because the function calls are actually being overridden at runtime by Selenium’s own JavaScript. However, just because you cannot see the pop-up doesn’t mean you don’t have to deal with it. To handle a pop-up, you must call its assertFoo(pattern) function. If you fail to assert the presence of a pop-up your next command will be blocked and you will get an error similar to the following [error] Error: There was an unexpected Confirmation! [Chose an option.]


Let’s start with alerts because they are the simplest pop-up to handle. To begin, open the HTML sample above in a browser and click on the “Show alert” button. You’ll notice that after you close the alert the text “Alert is gone.” is displayed on the page. Now run through the same steps with Selenium IDE recording, and verify the text is added after you close the alert. Your test will look something like this:

assertAlertI’m blocking!
verifyTextPresentAlert is gone.

You may be thinking “That’s odd, I never tried to assert that alert.” But this is Selenium-IDE handling and closing the alert for you. If you remove that step and replay the test you will get the following error [error] Error: There was an unexpected Alert! [I'm blocking!]. You must include an assertion of the alert to acknowledge its presence.

If you just want to assert that an alert is present but either don’t know or don’t care what text it contains, you can use assertAlertPresent. This will return true or false, with false halting the test.


Confirmations behave in much the same way as alerts, with assertConfirmation and assertConfirmationPresent offering the same characteristics as their alert counterparts. However, by default Selenium will select OK when a confirmation pops up. Try recording clicking on the “Show confirm box” button in the sample page, but click on the “Cancel” button in the popup, then assert the output text. Your test may look something like this:

assertConfirmationChoose an option.

The chooseCancelOnNextConfirmation function tells Selenium that all following confirmation should return false. It can be reset by calling chooseOkOnNextConfirmation.

You may notice that you cannot replay this test, because Selenium complains that there is an unhandled confirmation. This is because the order of events Selenium-IDE records causes the click and chooseCancelOnNextConfirmation to be put in the wrong order (it makes sense if you think about it, Selenium can’t know that you’re cancelling before you open a confirmation) Simply switch these two commands and your test will run fine.


Prompts behave in much the same way as alerts, with assertPrompt and assertPromptPresent offering the same characteristics as their alert counterparts. By default, Selenium will wait for you to input data when the prompt pops up. Try recording clicking on the “Show prompt” button in the sample page and enter “Selenium” into the prompt. Your test may look something like this:

assertPromptWhat’s the best web QA tool?

If you choose cancel on the prompt, you may notice that answerOnNextPrompt will simply show a target of blank. Selenium treats cancel and a blank entry on the prompt basically as the same thing.


Debugging means finding and fixing errors in your test case. This is a normal part of test case development.

We won’t teach debugging here as most new users to Selenium will already have some basic experience with debugging. If this is new to you, we recommend you ask one of the developers in your organization.

Breakpoints and Startpoints

The Sel-IDE supports the setting of breakpoints and the ability to start and stop the running of a test case, from any point within the test case. That is, one can run up to a specific command in the middle of the test case and inspect how the test case behaves at that point. To do this, set a breakpoint on the command just before the one to be examined.

To set a breakpoint, select a command, right-click, and from the context menu select Toggle Breakpoint. Then click the Run button to run your test case from the beginning up to the breakpoint.

It is also sometimes useful to run a test case from somewhere in the middle to the end of the test case or up to a breakpoint that follows the starting point.
For example, suppose your test case first logs into the website and then performs a series of tests and you are trying to debug one of those tests.
However, you only need to login once, but you need to keep rerunning your tests as you are developing them. You can login once, then run your test case from a startpoint placed after the login portion of your test case. That will prevent you from having to manually logout each time you rerun your test case.

To set a startpoint, select a command, right-click, and from the context menu select Set/Clear Start Point. Then click the Run button to execute the test case beginning at that startpoint.

Stepping Through a Testcase

To execute a test case one command at a time (“step through” it), follow these steps:

  1. Start the test case running with the Run button from the toolbar.

  2. Immediately pause the executing test case with the Pause button.

  3. Repeatedly select the Step button.

Find Button

The Find button is used to see which UI element on the currently displayed webpage (in the browser) is used in the currently selected Selenium command.
This is useful when building a locator for a command’s first parameter (see the section on :ref:locators <locators-section> in the Selenium Commands chapter). It can be used with any command that identifies a UI element on a webpage, i.e. click, clickAndWait, type, and certain assert and verify commands, among others.

From Table view, select any command that has a locator parameter. Click the Find button.
Now look on the webpage: There should be a bright green rectangle enclosing the element specified by the locator parameter.

Page Source for Debugging

Often, when debugging a test case, you simply must look at the page source (the HTML for the webpage you’re trying to test) to determine a problem. Firefox makes this easy. Simply right-click the webpage and select ‘View->Page Source.
The HTML opens in a separate window. Use its Search feature (Edit=>Find) to search for a keyword to find the HTML for the UI element you’re trying to test.

Alternatively, select just that portion of the webpage for which you want to see the source. Then right-click the webpage and select View Selection Source. In this case, the separate HTML window will contain just a small amount of source, with highlighting on the portion representing your selection.

Locator Assistance

Whenever Selenium-IDE records a locator-type argument, it stores additional information which allows the user to view other possible locator-type arguments that could be used instead. This feature can be very useful for learning more about locators, and is often needed to help one build a different type of locator than the type that was recorded.

This locator assistance is presented on the Selenium-IDE window as a drop-down list accessible at the right end of the Target field (only when the Target field contains a recorded locator-type argument).
Below is a snapshot showing the contents of this drop-down for one command. Note that the first column of the drop-down provides alternative locators, whereas the second column indicates the type of each alternative.

Selenium Locator Assistance

Writing a Test Suite

A test suite is a collection of test cases which is displayed in the leftmost pane in the IDE.
The test suite pane can be manually opened or closed via selecting a small dot halfway down the right edge of the pane (which is the left edge of the entire Selenium-IDE window if the pane is closed).

The test suite pane will be automatically opened when an existing test suite is opened or when the user selects the New Test Case item from the File menu. In the latter case, the new test case will appear immediately below the previous test case.

Selenium-IDE also supports loading pre-existing test cases by using the File -> Add Test Case menu option. This allows you to add existing test cases to a new test suite.

A test suite file is an HTML file containing a one-column table. Each cell of each row in thesection contains a link to a test case. The example below is of a test suite containing four test cases:

        <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
        <title>Sample Selenium Test Suite</title>
        <table cellpadding="1" cellspacing="1" border="1">
                <tr><td>Test Cases for De Anza A-Z Directory Links</td></tr>
            <tr><td><a href="./a.html">A Links</a></td></tr>
            <tr><td><a href="./b.html">B Links</a></td></tr>
            <tr><td><a href="./c.html">C Links</a></td></tr>
            <tr><td><a href="./d.html">D Links</a></td></tr>

Note: Test case files should not have to be co-located with the test suite file that invokes them. And on Mac OS and Linux systems, that is indeed the case. However, at the time of this writing, a bug prevents Windows users from being able to place the test cases elsewhere than with the test suite that invokes them.

User Extensions

User extensions are JavaScript files that allow one to create his or her own customizations and features to add additional functionality. Often this is in the form of customized commands although this extensibility is not limited to additional commands.

There are a number of useful extensions_ created by users.


.. _goto_sel_ide.js extension:

Perhaps the most popular of all Selenium-IDE extensions is one which provides flow control in the form of while loops and primitive conditionals. This extension is the goto_sel_ide.js_. For an example of how to use the functionality provided by this extension, look at the page_ created by its author.

To install this extension, put the pathname to its location on your computer in the Selenium Core extensions field of Selenium-IDE’s Options=>Options=>General tab.

Selenium IDE Extensions Install

After selecting the OK button, you must close and reopen Selenium-IDE in order for the extensions file to be read. Any change you make to an extension will also require you to close and reopen Selenium-IDE.

Information on writing your own extensions can be found near the bottom of the Selenium Reference_ document.

Sometimes it can prove very useful to debug step by step Selenium IDE and your User Extension. The only debugger that appears able to debug XUL/Chrome based extensions is Venkman which is supported in Firefox until version 32 included. The step by step debug has been verified to work with Firefox 32 and Selenium IDE 2.9.0.


Format, under the Options menu, allows you to select a language for saving and displaying the test case. The default is HTML.

If you will be using Selenium-RC to run your test cases, this feature is used to translate your test case into a programming language. Select the language, e.g. Java, PHP, you will be using with Selenium-RC for developing your test programs. Then simply save the test case using File=>Export Test Case As. Your test case will be translated into a series of functions in the language you choose. Essentially, program code supporting your test is generated for you by Selenium-IDE.

Also, note that if the generated code does not suit your needs, you can alter it by editing a configuration file which defines the generation process.
Each supported language has configuration settings which are editable. This is under the Options=>Options=>Formats tab.

Executing Selenium-IDE Tests on Different Browsers

While Selenium-IDE can only run tests against Firefox, tests developed with Selenium-IDE can be run against other browsers, using a simple command-line interface that invokes the Selenium-RC server. This topic is covered in the :ref:Run Selenese tests <html-suite> section on Selenium-RC chapter. The -htmlSuite command-line option is the particular feature of interest.


Below is a list of image/explanation pairs which describe frequent sources of problems with Selenium-IDE:

Table view is not available with this format.

This message can be occasionally displayed in the Table tab when Selenium IDE is launched. The workaround is to close and reopen Selenium IDE. See issue 1008. for more information. If you are able to reproduce this reliably then please provide details so that we can work on a fix.

error loading test case: no command found

You’ve used File=>Open to try to open a test suite file. Use File=>Open Test Suite instead.

An enhancement request has been raised to improve this error message. See issue 1010.

Selenium IDE Trouble Timing

This type of error may indicate a timing problem, i.e., the element specified by a locator in your command wasn’t fully loaded when the command was executed. Try putting a pause 5000 before the command to determine whether the problem is indeed related to timing. If so, investigate using an appropriate waitFor* or *AndWait command before the failing command.

Selenium IDE Trouble Param

Whenever your attempt to use variable substitution fails as is the case for the open command above, it indicates that you haven’t actually created the variable whose value you’re trying to access. This is sometimes due to putting the variable in the Value field when it should be in the Target field or vice versa. In the example above, the two parameters for the store command have been erroneously placed in the reverse order of what is required. For any Selenese command, the first required parameter must go in the Target field, and the second required parameter (if one exists) must go in the Value field.

error loading test case: [Exception… “Component returned failure code: 0x80520012 (NS_ERROR_FILE_NOT_FOUND) [nsIFileInputStream.init]” nresult: “0x80520012 (NS_ERROR_FILE_NOT_FOUND)” location: “JS frame :: chrome://selenium-ide/content/file-utils.js :: anonymous :: line 48” data: no]

One of the test cases in your test suite cannot be found. Make sure that the test case is indeed located where the test suite indicates it is located. Also, make sure that your actual test case files have the .html extension both in their filenames, and in the test suite file where they are referenced.

An enhancement request has been raised to improve this error message. See issue 1011.

Selenium IDE Trouble Extension

Your extension file’s contents have not been read by Selenium-IDE. Be sure you have specified the proper pathname to the extensions file via Options=>Options=>General in the Selenium Core extensions field. Also, Selenium-IDE must be restarted after any change to either an extensions file or to the contents of the Selenium Core extensions field.

1 - HTML runner

Execute HTML Selenium IDE exports from command line

Selenium HTML-runner allows you to run Test Suites from a command line. Test Suites are HTML exports from Selenium IDE or compatible tools.

Common information

  • Combination of releases of geckodriver / firefox / selenium-html-runner matters. There might be a software compatibility matrix somewhere.
  • selenium-html-runner runs only Test Suite (not Test Case - for example an export from Monitis Transaction Monitor). Be sure you comply with this.
  • For Linux users with no DISPLAY - you need to start html-runner with Virtual display (search for xvfb)

Example Linux environment

Install / download following software packages:

[user@localhost ~]$ cat /etc/redhat-release
CentOS Linux release 7.4.1708 (Core)

[user@localhost ~]$ rpm -qa | egrep -i "xvfb|java-1.8|firefox"

Test Suite example:

[user@localhost ~]$ cat testsuite.html
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "">
<html xmlns="" xml:lang="en" lang="en">
  <meta content="text/html; charset=UTF-8" http-equiv="content-type" />
  <title>Test Suite</title>
<table id="suiteTable" cellpadding="1" cellspacing="1" border="1" class="selenium"><tbody>
<tr><td><b>Test Suite</b></td></tr>
<tr><td><a href="YOUR-TEST-SCENARIO.html">YOUR-TEST-SCENARIO</a></td></tr>

How to run selenium-html-runner headless

Now, the most important part, an example of how to run the selenium-html-runner! Your experience might vary depending on software combinations - geckodriver/FF/html-runner releases.

xvfb-run java -Dwebdriver.gecko.driver=/home/mmasek/geckodriver.0.18.0 -jar selenium-html-runner-3.7.1.jar -htmlSuite "firefox" "https://YOUR-BASE-URL" "$(pwd)/testsuite.html" "results.html" ; grep result: -A1 results.html/firefox.results.html
[user@localhost ~]$ xvfb-run java -Dwebdriver.gecko.driver=/home/mmasek/geckodriver.0.18.0 -jar selenium-html-runner-3.7.1.jar -htmlSuite "*firefox" "https://YOUR-BASE-URL" "$(pwd)/testsuite.html" "results.html" ; grep result: -A1 results.html/firefox.results.html
Multi-window mode is longer used as an option and will be ignored.
1510061109691   geckodriver     INFO    geckodriver 0.18.0
1510061109708   geckodriver     INFO    Listening on
1510061110162   geckodriver::marionette INFO    Starting browser /usr/bin/firefox with args ["-marionette"]
1510061111084   Marionette      INFO    Listening on port 43229
1510061111187   Marionette      WARN    TLS certificate errors will be ignored for this session
Nov 07, 2017 1:25:12 PM org.openqa.selenium.remote.ProtocolHandshake createSession
INFO: Detected dialect: W3C
2017-11-07 13:25:12.714:INFO::main: Logging initialized @3915ms to org.seleniumhq.jetty9.util.log.StdErrLog
2017-11-07 13:25:12.804:INFO:osjs.Server:main: jetty-9.4.z-SNAPSHOT
2017-11-07 13:25:12.822:INFO:osjsh.ContextHandler:main: Started o.s.j.s.h.ContextHandler@87a85e1{/tests,null,AVAILABLE}
2017-11-07 13:25:12.843:INFO:osjs.AbstractConnector:main: Started ServerConnector@52102734{HTTP/1.1,[http/1.1]}{}
2017-11-07 13:25:12.843:INFO:osjs.Server:main: Started @4045ms
Nov 07, 2017 1:25:13 PM org.openqa.selenium.server.htmlrunner.CoreTestCase run
INFO: |open | /auth_mellon.php |  |
Nov 07, 2017 1:25:14 PM org.openqa.selenium.server.htmlrunner.CoreTestCase run
INFO: |waitForPageToLoad | 3000 |  |


2 - Legacy Selenium IDE Release Notes

Selenium IDE was the original Firefox extension for Record and Playback. Version 2.x was updated to support WebDriver.

This documentation previously located on the wiki

2.9.1 - to be released



  • New - Added visual assist option to help users requiring stronger constrast in colors, turned off by default. Turn it on from the Options dialog. - Issue 7696 (on Google Code)
  • New - Health Service to catch unhandled exceptions, statistics, metrics and diagnostics
  • Enh - Added Search Issues menu item in Help menu to make it easier to search all issues so that we do not get so many duplicate reports of the same issue
  • Fix - Fixed broken autocomplete - issue 7928 (on Google Code)
  • Fix - Fixed cancelling of select button when page is reloaded - issue 7793 (on Google Code)
  • Fix - Adding select button to the sidebar and reduced button size - issue 7815 (on Google Code)


  • Fix - Fixed switching between tabs in the bottom info panel in FF32 - issue 7824 (on Google Code)
  • Fix - Fixes for
  • Enh - Let comments (and commands) span the full width of the commands table
  • Enh - Show the result of the test case in the log after it has been played
  • Enh - Group items in the Action menu by function
  • Enh - Collect more statistics about test case and suite including running time for reporting purposes
  • Enh - Improved listboxes supporting drag and drop reordering
  • Enh - Provide common utility function for plugin authors to deal with files
  • Enh - Allow pressing tab in the command text box to accept the current autocomplete and move to the target text box
  • Enh - Select an autocomplete match when typing in the command text box to speed up manual entry of commands
  • Enh - Make promises implementation available via deferred.js for plugin developers
  • Enh - Make simple http functions available for plugin developers
  • Enh - Easier to use confirmations for internal use and for plugins
  • Fix - Disable autocomplete when editing comments
  • Fix - Fixed error TypeError: command.isRollup is not a function
  • Fix - Fixed TypeError: debugContext.currentCommand is undefined
  • Fix - Fixed TypeError: this.treebox is undefined treeView.js
  • Fix - Various errors when selecting a comment (usually hidden from the user)
  • Fix - Incorrect doctype in overlay
  • Fix - Adding Selenium IDE item under Settings->Developer menu - issue 7268 (on Google Code)
  • Fix - Ignore Firefox developer tools while recording


  • Fix - Fixed broken autocompletion in FF31+ - issue 7645 (on Google Code)
  • Fix - Fixed options validation on options reset - issue 1050 (on Google Code)
  • Fix - Fixed C# code formatting for select elements


  • Enh - Select an element for a command by clicking on the element in the browser window (
  • Enh - Start playing a test suite from any test case (Using right click menu) - issue 1987 (on Google Code)
  • Enh - Add a new test case using a keyboard shortcut (ctrl-N or cmd+N)
  • Fix - Fixed delete test case through right click menu was sometimes disabled - issue 5003 (on Google Code)
  • Fix - Fixed Selenium IDE icon is sometimes not visible - issue 5712 (on Google Code)
  • Fix - Fixed selectWindow using a variable - issue 3270 (on Google Code)
  • Some minor changes


  • Enh - Base URL history, recent test cases and recent test suites can be cleared - issue 6135 (on Google Code)
  • Enh - Special key now have shorter names (
  • Enh - Support for user extensions in Webdriver playback - issue 5675 (on Google Code)
  • Fix - The recording of entering text in fields uses type instead of sendKeys.
  • Enh - When developer tools are active, the last open test case or suite is automatically opened
  • Fix - Fixed is* commands in Webdriver playback in Selenium IDE - issue 6118 (on Google Code)
  • Enh - Adding ability to show commands as deprecated in Selenium IDE and smartness to show the correct alternative command
  • Enh - Deprecating Selenium IDE commands *TextPresent, typeKeys, keyUp, keyDown and keyPress
  • Enh - Import json library in exported Ruby Webdriver tests
  • Enh - Adding support for waitFor* and waitForNot* commands in Webdriver playback - issue 5913 (on Google Code)


  • New - Added support for HTML5 input fields recording - issue 3765 (on Google Code)
  • New - Recording for sendKeys command
  • Enh - Removal of deprecated *TextPresent commands from right click menu
  • Fix - Dead object error in recording IDE tests - issue 4761 (on Google Code)
  • Fix - Fixed could not continue in recording - issue 5820 (on Google Code)
  • Enh - UTF-8 encoded user-extensions.js support - issue 1646 (on Google Code)
  • New special keys support for sendKeys in Selenium IDE and webdriver playback - issue #6052 (on Google Code)
  • New - Special keys support to sendKeys in all official formatters - issue 6053 (on Google Code) (
  • Enh - Plugin api enhancement for specifying formatter type + documentaton comments
  • Fix - Invalid XPath error in Firefox 23 - issue 6055 (on Google Code)
  • New - Added support for Firefox 23


  • Fix - keyUp, keyDown, keyPress, typeKeys fixed on Firefox 22 - issue 5883 (on Google Code), issue 5884 (on Google Code)




  • New - Added support for Firefox 16 & 17
  • New - Implemented formatting for alert handling commands
  • Bug - Fixed options for Java 4 WebDriver formatter
  • Bug - Processing locators before use in getCssCount and getXpathCount. Fixes issue 4784 (on Google Code)




  • New - Added support for Firefox 13


  • New - Added support for Firefox 12


  • Bug - Fixed regression with typing into file input fields - issue 3549 (on Google Code)


  • Bug - Fixed regression with stored variables - issue 3520 (on Google Code)


  • New - Added additional useful menu items to the help menu
  • New - Added support for Firefox 11
  • Bug - Stored variables can safely contain consecutive dollar signs - issue 834 (on Google Code)
  • Bug - Don’t trim whitespace when decoding HTML testcases - issue 755 (on Google Code)
  • New - Formatter menu items are now context sensitive - issue 3327 (on Google Code) and issue 3385 (on Google Code)
  • Bug - Fixed Ruby WebDriver test suite export - issue 3243 (on Google Code)
  • Bug - File extensions being added to all file pickers - issue 3336 (on Google Code)
  • Bug - Record interactions with elements with an id of ‘id’ - issue 3273 (on Google Code)


  • New - Added support for Firefox 10
  • New - Added keyboard shortcuts to launch Selenium IDE - issue 3028 (on Google Code)
  • Bug - Added break command to autocomplete list - issue 3046 (on Google Code)
  • Bug - Incorrect tooltip displayed in sidebar - issue 3098 (on Google Code)
  • Bug - Improved XPath locator recording when there are multiple matches - issue 3056 (on Google Code)
  • Bug - Locators can now be reordered on Mac - issue 3267 (on Google Code)


  • New - Added support for Firefox 9
  • Bug - Changes to user extensions weren’t being updated in Firefox 8 - issue 2801 (on Google Code)
  • Bug - Security error was thrown when trying to type into file (upload) input fields in Firefox 8 - issue 2826 (on Google Code)
  • Bug - Improved French locale - issue 1912 (on Google Code)
  • Bug - break command was failing - issue 725 (on Google Code)
  • Bug - source view is now fixed width (monospace) - issue 522 (on Google Code)
  • New - Implemented ‘select’ formatting for WebDriver bindings (Java, C#, Python, Ruby)
  • Bug - Fixed compile-time and run-time errors in the code formatted for WebDriverBackedSelenium
  • Bug - Fixed ‘baseUrl’ and ‘get’ formatting errors in various formatters to handle relative and absolute URLs


  • Bug - Apparently I shipped without switching all the version numbers correctly. (Adam)


  • New - Firefox 8 support (again, just a version max version bump)


Was going to be just a quick release to get

  • New - Firefox 7 support (again, just a version max version bump)

in, but then I got busy and didn’t push it when I had planned and so now

  • New - Order of locators can be controlled through a panel in options.

has leaked in. Most people will want to just leave this the way it is by default. This is brand-spanking-new and allows you to do visually what you could before using a somewhat arcane bit of JS in an extension.


Just a quick release primarily for

  • New - Firefox 6 support (which really was just changing the max version number)

But we also snuck in

  • Bug - Recorded CSS locator was not W3C clean wrt attributes
  • Bug - Deleting of cookies works properly if the cookie name is escaped (such as will ASP sites)
  • Bug - If the cookie value has an = in it, the whole cookie is now returned instead of just up to the =

You will also notice that the bundle now only has formatters for the officially supported languages of the project (Java, C#, Python, Ruby). If anyone from the Perl, Groovy or PHP camps wants to take on ownership of those formats we’ll happily help you out.


Hey! Look at that! A slightly more significant version bump! Any why is that? Well…

  • New - WebDriver exports for Ruby, Python, C# and Java

Which are the four supported languages of the Selenium project. This also means that Se-IDE is officially deprecating inclusion of the Groovy, Perl and PHP format plugins in the main release bundle. It would be outstanding if the community around those languages picks up their development and maintenance. Read more about the WebDriver exporters on Samit’s blog.

Of course, format switching is still in Experimental purgatory for at least this release. Losing people’s scripts because of bugs is not acceptable and we’re working on it. To ‘goal’ is to have them back for the next release.

Also included in this release are

  • New - setIndent(n) is now available to formats for greater control over formatting of export formats
  • Bug - There was a performance regression in deep in some shared code that has been addressed.
  • New - Rather than recording ‘foo’ for an element which and an id of ‘foo’ it is captured as ‘id=foo’ to be very specific as to which element would be interacted with
  • New - Same with ’name’
  • New - Popups (alerts, confirms, prompts) and new windows work again


This is a minor release with nothing too huge included. But because the last one didn’t get pushed to the world, it is important to make a note of a big change introduced in 1.0.11.

We have marked the changing of formats as Experimental due to a couple lose-all-your-data bugs. As a result it is disabled in the toolbar by default. To enable it, click the checkbox in the Options menu. And because we really don’t want you to lose your data, when you switch formats you will get a big warning box. This too can be disabled in the Options menu. But if you do both of these things and your script gets sent to the abyss, you have been warned. :)

Changes in this release include the following:

  • New - Firefox 5 support
  • New - When upgrading Se-IDE, the release notes (these) are shown on first start
  • Bug - some Java format changes
  • Bug - some PHP format changes
  • Bug - the ‘Find’ button works again
  • Bug - generated CSS is standards compliant
  • New - dropped support for FF 3.5 or older


It has been half a year since our last release of 1.0.10 and we have put a lot of effort to bring you this release. The summary of the contributions to this release is as follows:-

73% (22)Samit Badle
16%( 5)Adam Goucher
6% (2)Dave Hunt
3% (1)Santiago Suarez Ordoñez
3% (1)Simon Stewart

Here is the list of changes excluding some minor fixes and code refactoring.

Main Features:

  • Firefox 4 support (Issue 1470 (on Google Code), Simon Stewart and Samit Badle)
  • New CSS locator builder! Selenium IDE will now create locators using CSS when recording (Santiago Suarez Ordoñez)
  • Added more power to the plugin developers through the new Util command builders support (Issue 442 (on Google Code), Samit Badle)
  • New command getCssCount (Adam Goucher)

Usability Improvements:

  • Selenium IDE is now available from the Web developer menu in Firefox 4 (Issue 1467 (on Google Code), Samit Badle)
  • Camel Case search in command text box has been improved allowing you to type vTP for verifyTextPresent command (Samit Badle with Dave Hunt)
  • Most actions in Selenium IDE are now accessible through the new Actions menu (Issue 1266 (on Google Code), Samit Badle and Dave Hunt)
  • Removed help menu items related to Firefox from Selenium IDE help menu (Issue 1704 (on Google Code), Samit Badle)
  • Less prompting when saving test suite (Issue 967 (on Google Code), Samit Badle)
  • A method to Reset IDE Window is now available through the Options menu for people having trouble when switching from multiple monitors (Issue 1249 (on Google Code), Samit Badle)
  • Show the name of the test case in save dialog (Issue 984 (on Google Code), Samit Badle)
  • The preferences for the current format will be automatically shown in options dialog (Samit Badle)
  • The plugins pane in the Options dialog now has a splitter (Samit Badle)
  • Default Timeout Value field in the Options dialog now mentions a unit (Issue 896 (on Google Code), Adam Goucher)
  • Introduced experimental features option to hide some unstable features (Samit Badle)

Bug Fixes:

  • Format changing is now marked as experimental due to possible issues, you can turn it on from the options dialog (Samit Badle)
  • Fixed the header issue on saving test case in another format (Issue 1164 (on Google Code), Samit Badle)
  • Improved alert on changing the format (Issue 1244 (on Google Code), Samit Badle)
  • Find button is back on Macs and uses a new way to highlight (Issue 1052 (on Google Code), Samit Badle)
  • Recording is possible in the middle of a script again (Issue 968 (on Google Code), Samit Badle)
  • Fixed the annoying skip over one command when recording in the middle of the script (Issue 745 (on Google Code), Samit Badle)
  • While recording, “clickAndWait” command becomes “click” is now fixed (Issue 419 (on Google Code), Samit Badle)
  • Selenium IDE bottom pane folding now works correctly (Issue 614 (on Google Code), Samit Badle)
  • Changed the ID of Selenium IDE menu from generic name to avoid clashes with other addons. (Issue 969 (on Google Code), Samit Badle)
  • Fixed support for stored variables in PHP formatter (Issue 970 (on Google Code), Samit Badle)
  • Allow formatters to customise how set* is handled (Adam Goucher)
  • Some bug fixes in PHP formatter (Issue 1281 (on Google Code), Adam Goucher)
  • Number type fix (Jeremy Herault)
  • New Java formatter: Webdriver backed Junit 4 formatter
  • New PHP formatter: Testing selenium formatter (Adam Goucher)

Known Issues:

  • Issue 1728 (on Google Code) - Firefox 4 eliminated support for the highlight. So the Find button has stopped working under Firefox 4 on Windows.
  • Issue 1729 (on Google Code) - The Plugin pane in the Options dialog is not shownig any text in Firefox 4 on Windows 7.
  • Issues have been reported in Selenium IDE on Ubuntu 11, which are not related to Selenium IDE. See comments on issue 1642 (on Google Code).


Another packaging problem broke the various things that used getText(). Which of course is one of the most commonly used bits of the API.

  • BUG - properly including se-core atoms

As a result, we’ve started to rebuild the test suite for things. It’s going to take awhile to get the coverage we’re hoping for, but it’ll be worth it if we can go at least 2 days after a release before becoming embarrassed.

Upgrade Notes:


What started out as a pretty major change in terms of packaging ended up including two significant bug fixes as well. Hopefully we avoid that sort of thing with the release. Not that I don’t expect it. :)

  • BUG - Sizzle CSS library not included
  • BUG - Recording works with FF 4.0b7

What 1.0.9 was supposed to only have was…

  • NEW - Formatters are all plugins. This effectively separates the development of an individual format from the development of the editor. Now, this means that when you install things for the first time you get a tonne of addons. That is ok. Don’t panic. Oh, and it also means if you don’t want them you have the option to. Not only does this mean fixes to formats get distributed sooner (PHP, I’m looking at you) but 3rd parties will be able to make better packaging choices by having the editor plus their formatters.

Other stuff

  • BUG - the JUnit 4 formatter doesn’t try to use a string as the port number
  • BUG - the window when creating new formats properly closes now
  • BUG - removed the ‘find’ button if on OSX since it doesn’t do anything on this platform (its a FF bug)
  • BUG - some hard coded strings have been internationalized
  • NEW - autocomplete has been enhanced somewhat - see
  • BUG - when switching build systems, the icons for menus and such got left out of the package
  • BUG - commands are trimmed of whitespace before executing which was sometimes a source of great confusion
  • BUG - now preserves whitespace when displaying diffs in the log


This release is primarily to get FF4 support out into the wild since it is getting to the advanced beta phase, but there is also a fair bit of other bug fixes in there as well. About 75% of the fixes in the release are directly the work of Samit Badle and the vast remainder by Jérémy Hérault.

  • BUG - There was an annoying bug where ‘clickAndWait’ would be saved as click, but has been fixed. see
  • NEW -This could arguably be considered a bug fix, but if you changed format from HTML to something else then made an edit and switched back again to HTML your script contents would be lost. At its heart, the HTML -> something conversion is one way and so there is now a warning about possibly losing your code. The warning only happens the first time though so you can still shoot yourself in the foot; its just harder
  • BUG - element locator works for table rows. see
  • BUG - the default timeout setting of se-ide is now actually used. see
  • NEW - the ‘run in the selenium testrunner’ option has been removed. The supported methods in se-ide are the play single, play suite and if you need more there is always se-rc with a language binding or -htmlSuite
  • BUG - the base url wouldn’t change on occasion, much to the frustration of many
  • NEW - a JUnit 4 formatter was added
  • BUG - the RSpec formatter had some additional tweaks
  • BUG - test suite html can now have tests from different folders
  • BUG - test suite saving triggers got a bit of attention so add/delete/modify is a little more robust
  • NEW - if you resize your se-ide and/or move it around your screen, the size and position are saved between sessions
  • BUG - the logic around when to prompt for saving wasn’t really that nice, but its been fixed
  • NEW - uses ‘browser atoms’ like the rest of Selenium
  • NEW - CSS locator execution is handled through Sizzle
  • NEW - can now add multiple test cases to a suite at once
  • NEW - addition to the se-ide plugin api to add se-ide extensions to manipulate how recording is done -
  • NEW - the case of the missing log messages is now solved
  • NEW - Firefox 4 support


Only a couple of things of note in this release to end-users which is somewhat silly since it is a month overdue, but that was due to some build changes that took a bit of work to get the kinks worked out. Should be ok now though.

  • NEW - you can now drag-and-drop command around instead of the cut-insert-paste dance that you used to have to do (Jérémy Hérault)
  • NEW - same thing with tests in the test suite panel (Jérémy Hérault)
  • NEW - an new optional parameter when registering you se-ide plugin to allow for command exporting. see for details (Adam Goucher)
  • NEW - Swedish locale sv-SE now has translations (Olle Jonsson)
  • BUG - Some people were reporting an annoying popup when starting se-ide without any plugins installed (Adam oucher)


The big thing in this release is that the scary log message that was showing up on ‘open’ is fixed. The other big things are:

  • BUG - The scary log message that was happening when you used ‘open’ has had its underlying cause fixed (Adam Goucher, Jérémy Hérault)
  • BUG - fixed a build issue with FF 3.6 and type-ahead for commands (Jérémy Hérault)
  • BUG - fixed some PHP export issues - see and (Adam Goucher)
  • BUG - there was a packaging issue around user-extensions (Adam Goucher)
  • BUG - ide won’t put ’name=’ as the Target when recording a selectWindow (David Burns)
  • BUG - to avoid confusion, when viewing formatter source, if it is read-only the button says ‘ok’ and if it is editable then it is ‘save’ (Jérémy Hérault)
  • NEW - you can now set a preference on whether you want record to be on or off when you start ide (Adam Goucher)
  • NEW - se-ide plugin information is read from the plugin’s install.rdf (most people won’t care about this, but its pretty cool from a geek perspective)


One thing that does not really fit the BUG or NEW label is that the code for Se-IDE is now in the main repo rather than tucked away in a somewhat hidden location.

  • BUG - user formats were not appearing in the list (Adam Goucher)
  • BUG - constrained how iframes were loaded; which is why AMO was unhappy (Adam Goucher)
  • BUG - a whole bunch of tweaks to the existing formats (Dave Hunt)
  • BUG - a bunch of French translation fixes / additions (Jérémy Hérault)
  • BUG - the reload user extensions button only shows up if you have the developer tool checkbox checked (Jérémy Hérault)
  • BUG - labelling access keys on test runner (Olle Jonsson)
  • BUG - cleaned up a bunch of references from OpenQA to SeleniumHQ (Olle Jonsson)
  • BUG - had an = instead of == (Olle Jonsson)
  • BUG - adding a bunch of ;’s to make jslint shut up (Olle Jonsson)
  • BUG - getting rid of the ‘setting something that only has a getter’ message in Firefox 3.6 (Dan Fabulich)
  • NEW - self hosting of updates to avoid delays at AMO (Adam Goucher)
  • NEW - the version of se-ide is now in the title bar (Adam Goucher)
  • NEW - added some Se-IDE specific icons here and there (Adam Goucher, Dave Hunt)
  • NEW - preferences can now be Bool’s as well (Adam Goucher)
  • NEW - added addPlugin(id) to the plugin API (Adam Goucher)
  • NEW - added a new panel to the Options screen around plugins. It doesn’t do much now other than list the plugins that registered themselves through addPlugin, but should do more for 1.0.6 (Adam Goucher)


Selenium IDE 1.0.4 marks a resurgence in the project with releases planned for the middle of each month. Here are the changes that have happened between versions 1.0.2 and 1.0.4 of Selenium IDE. (Don’t ask what happened to version 1.0.3)

  • BUG - Supported Firefox version increased to include the 3.6 series (Santiago Suarez Ordoñez)
  • BUG - Removed the Ruby formatter that was flagged as ‘deprecated’ (Adam Goucher)
  • NEW - Ruby formatter updated to use the selenium-client gem ( ) (Adam Goucher)
  • NEW - Ability to add custom user-extensions to extend the Selenium API through plugins to Selenium IDE (Adam Goucher)
  • NEW - Ability to add custom formatters to extend which languages are available to users through plugins to Selenium IDE (Adam Goucher)
  • NEW - Can now load changes to user extensions without having to restart Selenium IDE (Jérémy Hérault)
  • NEW - RSpec formatter


Version 1.0.4 would not have happened without the following assistance

  • Sauce Labs’ sponsoring of Adam Goucher to work on it
  • Jérémy Hérault and the SERLI team for their Helium plugin (which was the proof an API could / should be developed for Se-IDE)
  • Dave Hunt for his feedback on pre-release versions

For issues with this release or features you would like to see in future releases, please log them in the Google Code Issue tracker ( using the ide label so they don’t get lost.